3PLUS1® Multilevel Plasma Calibrator Set Antibiotics

Order No.: 61028
Parameters:
Ampicillin, Cefepime, Ceftazidime, Linezolid, Meropenem, Piperacillin, Sulbactam, Tazobactam
Antibiotics in Serum/Plasma – HPLC

Ampicillin

Cefepime

Ceftazidime

Linezolid

Meropenem

Piperacillin

Sulbactam*

Tazobactam*

 

* For performance evaluation only

3PLUS1® Multilevel Plasma Calibrator Set Antibiotics

For Antibiotics in Serum/Plasma by HPLC (61000)

These lyophilised calibrators from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to calibrate the measurement method in clinical diagnostics for the quantitative determination of antibiotics in serum/plasma. While following the instructions the calibrators should be handled and measured in the same manner as a patient specimen.

These calibrators are only available as multilevel calibrator set with 3 different concentration levels plus 1 blank value.

More Information
Content 4 x 1 ml (lyoph.)
Concentrations

Please note: All concentrations shown here are exemplatory. They do not reflect real data for the described products. Actual concentrations depend on the production lot of each product and can exclusively be found in the product information leaflet. Please ask for these product information leaflets or download them from the service site of the Chromsystems website.

Substance UnitCalibrator 1Calibrator 2Calibrator 3Blank Calibrator
Ampicillin mg/l 3.09 17.0 48.5 n.d. (< 1.0 mg/l)
Cefepime mg/l 3.26 43.0 169 n.d. (< 2.2 mg/l)
Ceftazidime mg/l 8.06 40.2 147 n.d. (< 1.8 mg/l)
Linezolid mg/l 4.05 15.4 30.2 n.d. (<  0.5 mg/l)
Meropenem mg/l 4.21 31.6 99.7 n.d. (< 1.1 mg/l)
Piperacillin mg/l 7.36 46.4 181 n.d. (< 1.0 mg/l)
Sulbactam mg/l 4.4 19.8 46.5 n.d. (< 2.2 mg/l)
Tazobactam mg/l 4.68 18.6 30.2 n.d. (< 4.0 mg/l)

n.d. = not determined, analytes under LOQ

Method of Analysis HPLC
Parameters Ampicillin, Cefepime, Ceftazidime, Linezolid, Meropenem, Piperacillin, Sulbactam, Tazobactam

Download of Product Information Leaflets
For logged-in customers the product information leaflets for calibrators, controls, internal standards and tuning mixes can be downloaded from the downloadcenter.


Download of all other documents
In the below section logged-in customers can download various documents such as instruction manuals, safety data sheets, traceability chains for calibrators, and external quality assessments.
These documents can also be downloaded from the downloadcenter.

As a customer please login or register to gain full access.

Ampicillin

Cefepime

Ceftazidime

Linezolid

Meropenem

Piperacillin

Sulbactam*

Tazobactam*

 

* For performance evaluation only

3PLUS1® Multilevel Plasma Calibrator Set Antibiotics

For Antibiotics in Serum/Plasma by HPLC (61000)

These lyophilised calibrators from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to calibrate the measurement method in clinical diagnostics for the quantitative determination of antibiotics in serum/plasma. While following the instructions the calibrators should be handled and measured in the same manner as a patient specimen.

These calibrators are only available as multilevel calibrator set with 3 different concentration levels plus 1 blank value.

More Information
Content 4 x 1 ml (lyoph.)
Concentrations

Please note: All concentrations shown here are exemplatory. They do not reflect real data for the described products. Actual concentrations depend on the production lot of each product and can exclusively be found in the product information leaflet. Please ask for these product information leaflets or download them from the service site of the Chromsystems website.

Substance UnitCalibrator 1Calibrator 2Calibrator 3Blank Calibrator
Ampicillin mg/l 3.09 17.0 48.5 n.d. (< 1.0 mg/l)
Cefepime mg/l 3.26 43.0 169 n.d. (< 2.2 mg/l)
Ceftazidime mg/l 8.06 40.2 147 n.d. (< 1.8 mg/l)
Linezolid mg/l 4.05 15.4 30.2 n.d. (<  0.5 mg/l)
Meropenem mg/l 4.21 31.6 99.7 n.d. (< 1.1 mg/l)
Piperacillin mg/l 7.36 46.4 181 n.d. (< 1.0 mg/l)
Sulbactam mg/l 4.4 19.8 46.5 n.d. (< 2.2 mg/l)
Tazobactam mg/l 4.68 18.6 30.2 n.d. (< 4.0 mg/l)

n.d. = not determined, analytes under LOQ

Method of Analysis HPLC
Parameters Ampicillin, Cefepime, Ceftazidime, Linezolid, Meropenem, Piperacillin, Sulbactam, Tazobactam

Download of Product Information Leaflets
For logged-in customers the product information leaflets for calibrators, controls, internal standards and tuning mixes can be downloaded from the downloadcenter.


Download of all other documents
In the below section logged-in customers can download various documents such as instruction manuals, safety data sheets, traceability chains for calibrators, and external quality assessments.
These documents can also be downloaded from the downloadcenter.

As a customer please login or register to gain full access.