3PLUS1® Multilevel Plasma Calibrator Set Neuroleptics 2/ EXTENDED
Amisulpride
Chlorprothixene
Levomepromazine
Melperone
Perazine
Pipamperone
Promethazine
Sertindole
Sulpiride
Thioridazine
Ziprasidone
Zotepine
Zuclopenthixol
3PLUS1® Multilevel Plasma Calibrator Set Neuroleptics 2/EXTENDED, lyophilised
These lyophilised calibrators from Chromsystems are based on human plasma and should be used according to the instruction manual. They are designed to calibrate the measurement method for the quantitative determination of neuroleptics 2/EXTENDED in serum/plasma. While following the instructions the calibrators should be handled and measured in the same manner as a patient specimen.
These calibrators are only available as multilevel calibrator set with 3 different concentration levels plus 1 blank value.
| Content | 4 x 1 ml (lyoph.) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Concentrations | Please note: Concentration values shown here are typical. For lot specific concentration values please refer to the product insert supplied with the materials. The product inserts can also be requested from us directly or downloaded from our website after login.
n.d. = not detected (< LOQ) The blank level is manufactured using the same matrix pool as used for the calibrator levels 1, 2 and 3. It was not fortified with any neuroleptics. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reconstitution | Carefully remove the rubber stopper from the vials. Add exactly 1.0 ml of distilled water into each vial. Return the stopper and incubate for 10 to 15 minutes at room temperature. Swirl the vials to dissolve the contents until homogeneity. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage conditions | Stored below -18 °C and unopened, the lyophilised calibrators are stable until the expiry date specified on the vial labels. The reconstituted calibrators can be stored in glass containers up to 1 week light protected and tightly capped at +2 to +8 C. If the calibrators cannot be used within this period, they should be aliquoted and stored frozen below -18 °C (up to 3 months). For more details about storage conditions please check your instruction manual. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Method of Analysis | LC-MS/MS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Parameter | Amisulpride, Chlorprothixene, Levomepromazine, Melperone, Perazine, Pipamperone, Promethazine, Sertindole, Sulpiride, Thioridazine, Ziprasidone, Zotepine, Zuclopenthixol |