Programmable Autosampler CLC 220
Order No.: 42250
Fully automated system
Injection volumes can be varied
Simple instrument maintenance
Lower risk of blockage
Integration with a computer-controlled data system
Controlled sample dosing
Programmable Autosampler CLC 220 for variable volume injection.
This programmable autosampler is a flexible and powerful system with reproducibility and linearity properties. Variable vial racks and adaptors for microtiter plates are avaible.
- Fully automated system, capacity of up to 120 samples for injection into the HPLC system
- Injection volumes can be varied by programming
- Injection valve and syringe are easily accessible, simplifying instrument maintenance
- Improved capillary providing a much lower risk of blockage
- Integration with a computer-controlled data system
- Sample dosing is controlled by a stepper motor-driven syringe
| Injection Volume | 0.1 - 999.9 µl |
|---|---|
| Sample racks | 2 racks for 60 vials (1.5 ml) or 192 samples (microtiter plates) |
| Sampling | X, Y, Z operated stepper motor driven syringe |
| Sample dosage | 500 µl glass syringe, linear stepper motor driven |
| Sample loop | Exchangeable, standard 100 µl or other volumes |
| Dosage method | Partial or full loop mode |
| Injection valve | 2-positions 6-port, motor driven |
| Reproducibility | CV < 0.5 % variable volume injection (10 µl; typically ~ 0.25 %) |
| Vial error | Prevents injection of air |
| Priority sample | Important samples can be inserted into the sequence |
| Communication | RS 232 and remote control |
| Power requirements | 110-240 V, 47-63 Hz |
| Dimensions | 478 x 396 x 275 mm (L x W x H ) |
| Weight | approx. 12 kg |
Programmable Autosampler CLC 220 for variable volume injection.
This programmable autosampler is a flexible and powerful system with reproducibility and linearity properties. Variable vial racks and adaptors for microtiter plates are avaible.
- Fully automated system, capacity of up to 120 samples for injection into the HPLC system
- Injection volumes can be varied by programming
- Injection valve and syringe are easily accessible, simplifying instrument maintenance
- Improved capillary providing a much lower risk of blockage
- Integration with a computer-controlled data system
- Sample dosing is controlled by a stepper motor-driven syringe
| Injection Volume | 0.1 - 999.9 µl |
|---|---|
| Sample racks | 2 racks for 60 vials (1.5 ml) or 192 samples (microtiter plates) |
| Sampling | X, Y, Z operated stepper motor driven syringe |
| Sample dosage | 500 µl glass syringe, linear stepper motor driven |
| Sample loop | Exchangeable, standard 100 µl or other volumes |
| Dosage method | Partial or full loop mode |
| Injection valve | 2-positions 6-port, motor driven |
| Reproducibility | CV < 0.5 % variable volume injection (10 µl; typically ~ 0.25 %) |
| Vial error | Prevents injection of air |
| Priority sample | Important samples can be inserted into the sequence |
| Communication | RS 232 and remote control |
| Power requirements | 110-240 V, 47-63 Hz |
| Dimensions | 478 x 396 x 275 mm (L x W x H ) |
| Weight | approx. 12 kg |